Makita HR2460 2-Modes SDS-plus Rotary Hammer 24mm 2.4J

It’s what’s INSIDE that counts.

HR2460 24mm(15/16) 2.4 J Rotary Hammer, SDS-PLUS Shank 780W

• High durability in mechanical parts, motor and carbon brush
• 2.4 Joules (EPTA) impact energy delivers high performance
• 2 operation modes hammering with rotation and rotation only
• Speed and torque in reverse are the same as forward rotation by using Brush Holder Unit
• One touch sliding chuck enables quick and easy bit changes
• Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
• Easy-to-operate large trigger switch and lock-on button
• Depth gauge for increased drilling consistency
• Side grip with elastomer soft grip
• Variable speed trigger allows operator to adjust speed based on materials or application
• Double insulated

Specifications:
Continuous rating input 780W
Impact Energy EPTA-Procedure 05/2009: 2.4 J
Our experimental conditions: 2.7 J
Capacity Concrete: 24 mm (15/16)
Steel: 13 mm (1/2)
Wood: 32 mm (1-1/4)
Blows Per Minute (BPM) 0 4,500
No Load Speed (RPM) 0 1,100
Sound Pressure Level 90 dB(A)
Sound Power Level 101 dB(A)
Vibration Level Hammer Drilling into Concrete: 15.5 m/s
Drilling: 4.5 m/s
Dimensions (L x W x H) 362x84x214 mm (14-1/4×3-5/16×8-3/8)
Net weight 2.8 3.2 kg (6.1 7.0 lbs.)
Power supply cord 2.5 m (8.2 ft)

Inclusions:
Side Grip, Depth Gauge

Lifetime Service Warranty