Sale! Dremel DREMEL Flap Wheel 9.5mm G80 502 2615050232
$4.00 $5.00
Flap wheels are great for finish removal and light material clean up because they are more forgiving than sanding bands. They wont bite into the material as quickly. They also tend to run a little cooler because of the flaps so they are less likely to put any burn into the material. Grind and polish flat or contoured surfaces. Most effective when used as a finishing sander after heavier surface sanding and material removal is completed. Comes in fine and coarse grades
- Flap wheels are most effective when the edge is flat against the work piece, allowing for the most abrasion to take place.
- Materials to use on and recommended speed
- Aluminium 30-35000 Brass 30-35000 Copper 30-35000 Hardwood 30000 Plastic 10000 Softwood 35000 Steel 35000
Technical Data
| Shank diameter | 3,2 mm |
| Working diameter | 28,6 mm |
| Working height | 9,5 mm |
| Accessory length | 50,0 mm |
| Grit | 80 |
| Width | 30,0 mm |
| Maximum RPM | 35.000 1/min |
| Length | 30,0 |
| Height | 44,0 |
| Quantity | 1 |
Includes
1x Wheel
| Cost: | $25 |
| Free Shipping: | We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout. |
| Delivery Time: | It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances. |
Reviews
There are no reviews yet.